软管泵品质优选

工业软管泵输油不足的可能原因及解决方法齿轮泵故障排除10个隔油环齿轮泵应能连续供油，齿轮啮合重叠系数应大于1。当一对齿轮未脱离啮合时，另一对齿轮已进入啮合状态。这样，当有两对齿轮同时啮合时，两对齿轮的齿啮合线之间形成一个封闭的体积，其中部分油也被困在其中。

Possible causes and solutions for insufficient oil delivery of industrial hose pumps. Gear pump troubleshooting. 10 oil-separating ring gear pumps should be able to supply oil continuously, and the gear meshing overlap factor should be greater than 1. When one pair of gears is not disengaged, the other pair of gears has entered the meshed state. In this way, when there are two pairs of gears meshing at the same time, a closed volume is formed between the tooth meshing lines of the two pairs of gears, and part of the oil is also trapped therein.

 

挤压轮的结构设计与拖鞋结构设计：
与挤塑轮结构设计相比，胶管泵的滑靴设计能承受更高的压力，因此要根据泵的需求压力和具体应用情况来决定哪种设计适合。挤压轮设计只需在软管表面涂上硅脂，不需要额外的润滑油，因为滚筒在软管表面“滚动”。因此，该设计可考虑用于涉及食品和饮料的应用，因为在软管故障和断裂的情况下，交叉污染的概率小于浸没在润滑油中的拖鞋设计蠕动泵的概率，即使油是“食品级”，通常也 使用滚筒设计。