【软管泵】路沿石成型机现货交易

更换泵管操作步骤：
将连接泵进出口的管道拆开，并将冷却液放出。将进出口管夹内六角螺栓（各四个）拧下。短接管及管卡取出。将进出口前接管螺栓旋出，将前接管、压环及密封圈取出。启动电机，使电机顺时针旋转，将软管拉出。启动电机，使电机逆时针旋转。将新软管一侧涂少量润滑脂（黄油），然后将涂有润滑脂的一侧向泵壳壁，从泵壳上方插入至泵壳中，直至软管到泵壳下方出口的合适位置，停电机。将密封圈套至软管下口泵接管内，将压环装入，拧紧前接管螺栓，装入管夹，拧紧管夹螺栓。启动电机，使电机逆时针旋转，用手或橡胶板堵住软管上方口，软管全自行进入泵中，通过泵侧面窗口观察，使软管贴到泵壳内壁，停电机，按固定的方式将软管安装好。填加冷却液，软管更换即告完成。

众所周知软管泵在运行时，是通过一根U型附有弹性的橡胶软管来完成输送。今天小编需要强调的是，软管存放时间不宜过长，一般以一年为限。在停工期间，对装有软管的泵，若长期不用，每隔一个月需转动泵一次。以免压辊长时间压在泵管的某一处，减弱管子回弹性，影响其流量的输送。

It is well known that when the hose pump is running, it is conveyed through a U-shaped rubber hose with elasticity. Today the editor needs to emphasize that the storage time of the hose should not be too long, and it is generally limited to one year. During the shutdown period, if the pump is equipped with a hose, if it is not used for a long time, the pump needs to be rotated every other month. So as not to press the roller for a long time at a certain position of the pump tube, it will weaken the resilience of the tube and affect its flow rate.